Aker BP has set up an art exhibition in front of the Oil Museum in Stavanger. The exhibition shows the development of the Valhall field, from analogue to digital field. Artist Darryn Lee, who works at Valhall, is behind the exhibition.

The Valhall field was developed in 1980 and has produced more than a billion barrels of oil equivalent since it was put into operation in 1982. The field is under development, three platforms have been or will be removed. A new central platform will be built and installed. At the same time, an extensive process is underway to digitalise equipment and work processes. The Valhall field will be able to produce for another 40 years.

Paintings and drawings have been reproduced on steel plates and mounted on steel from the old Valhall quarter platform (QP), which was removed in 2020 and 2021.

See the pictures and hear the artist’s explanation of the art here.

When the Ula field was officially opened on October 1986, the ambition was to produce for 10–11 years. Over the course of 35 years, it has produced more than three times what was expected at start-up. The goal is to continue operations until 2032.

BP’s entry on the Norwegian shelf

The Ula field, which is located in the southern part of the North Sea, is a key part of Norwegian petroleum history in several areas:

In 1976, BP purchased two-thirds of licence 019. This was the first licence the company acquired on the Norwegian shelf, and it included a licence obligation to drill two wildcat wells.

The first well was drilled shortly after the acquisition. Oil was encountered at a depth of 3,378 metres. The oil discovery was made just 70 metres below the point where a previous wildcat well was terminated in 1968.

With an ownership interest of 70 per cent, BP stepped into the role of operator for the subsequent Ula development, and the company established itself with a headquarters in Stavanger.

The Ula field was developed with three platforms (living quarters, drilling and process platforms) connected by bridges. The oil is transported to the Ekofisk Complex, and further to Teesside in the UK. Until 1998, gas was transported from Ula to Ekofisk via Cod.

Technology leader in improved recovery

When the field came on stream in 1986, the objective was to produce 160 million barrels of oil over approx. 11 years.

However, the potential was much greater. Overall, it was presumed that close to a billion barrels of oil and NGL were present in Ula’s primary reservoir in sandstone from the Late Jurassic. This meant that the start of production was also the start of a technology race to improve recovery from the field.

The most important technology milestone was the introduction of alternating water injection and gas injection (WAG), which started in 1998. The Ula field was one of the first in the world to alternate between injecting gas and water in order to produce more oil from the reservoir. Since WAG was introduced just over 20 years ago, all produced gas has been injected back into the Ula reservoir to increase oil recovery.

Ula hub strategy

Following the discovery of Ula in 1976, a number of production and injection wells have been drilled on the field. There has also been extensive exploration activity in the surrounding area. Among other things, the neighbouring Tambar field was discovered in 1983 and developed with a normally unmanned platform that is remotely operated from Ula.

First live broadcast from offshore field

Ula has also left its mark on Norwegian TV history: When the field was opened on 6 October 1986 by then-Stavanger mayor Kari Thu, public broadcaster NRK went live on the air from an offshore field for the first time in its history.

35 years later, Aker BP invited Kari Thu to the company’s offices in Stavanger to meet 35-year-old Roger Gabrielsen, who currently works as a FA automation technician on Ula and was just a few weeks old when Thu opened the field.

Aiming to be the best on late-life production

Now the field is entering late-phase. Good management of all barriers and efficient utilisation of resources are crucial factors for success.

«We’re proud of what we’ve achieved on Ula. But the story doesn’t end here: Our ambition is to produce at least 70 million more barrels from the Ula area leading up to 2032,» says Jorunn Kvåle, VP Operations & Asset development for Ula.

«We’re drawing up technical lifetime plans that define what we have to do to keep the facilities operating safely for the remaining period. We’re conducting equivalent analyses to preserve well integrity and implement the well maintenance necessary to protect production. At the same time, we need to continually look for opportunities to improve the rate of production and recovery using new technology. In short, our ambition is for Ula to be the best at operations in the late life phase,» says Kvåle.

Ula
Aker BP (80%, operatør), DNO (20%)

Tambar
Aker BP (55%, operatør), DNO 45%

Oda
Spirit Energy (40% operatør), Suncor Energy (30%), Aker BP (15%), DNO (15%)

Blane
Repsol (18%), Foreign licensees (82%)

Oselvar (production ended in 2018)
DNO (55%), CapeOmega (45%)

The energy transition is “the toughest job in the world”. Aker BP has already gotten started, alongside the other companies in Aker.

Energy is inextricably linked to the lives people lead all around the world. That’s why a global upheaval in the energy chain affects each and every one of us. These changes require a massive financing effort. The same can be said for new industries and jobs. At the same time, we want to secure the welfare state. This poses an enormous challenge.

No one can do this job alone. That’s why we are now calling for cooperation with the rest of the business community and the public authorities.

The Aker companies are fully engaged in contributing to cutting emissions, producing renewable energy and creating new jobs. We solve major challenges by combining a willingness to invest and new digital technology with the expertise of creative problem-solvers.

Aker Horizons has launched 2025 ambitions to contribute:

• At least 100 billion kroner in investments in renewable energy and green technology.
• Emission cuts of 25 million tonnes of CO₂ per year, equivalent to half Norway’s annual emissions.
• Ten gigawatts of renewable energy capacity, equivalent to 25 per cent of Norway’s total power consumption.

These investments would be unthinkable without dividends from Aker BP, and the foundation is our expertise and experience as a supplier and operating company in the oil industry.

Aker is a miniature version of Norway. Income from the oil and gas activity is now laying the groundwork for new industries. This is why we are pursuing at least two thoughts simultaneously, so that new sectors can grow from existing industry. Tax revenues from us are therefore not just important for the welfare society, but are also crucial for the transition to a renewable society.

There is no doubt that the world will become less dependent on fossil energy. Even so, oil and gas production and the low-emission society will have to live side by side for several decades to come.

So, while more and more of the energy we use will become renewable, there will be a need for oil and gas for a long time to come. This includes oil and gas that is not just used for energy, but also as raw materials for products we surround ourselves with in our day-to-day lives.

We believe that those who produce oil and gas with the lowest emissions and lowest costs will be the winners of tomorrow. That’s what we are aiming for, and we’re starting by reducing our own emissions.

But Aker BP won’t stop there. Being stewards of a shared natural resource means that we are also stewards of the trust placed in us. We embrace this responsibility. The entire oil and gas industry must therefore understand the gravity of the current situation. Our shared assets must be managed in a way that gives more back to society.

The Fixed facilities alliance, between Aker BP, Aker Solutions and ABB, has delivered yet another platform on time, with a high level of quality and with no harm to people or the environment. The topside was installed just one year and two months after the first steel cut.

The 2000-tonne topsides were placed on the jacket on the Hod field in the southern part of the North Sea on Sunday.

“The platform is delivered from a Norwegian yard and with Norwegian subcontractors. It is delivered according to plan, in just 14 months, in the middle of a pandemic. This is an enormous achievement. Congratulations to everyone who has contributed,” says Aker BP CEO Karl Johnny Hersvik.

Effect of the temporary tax changes

The first steel for Hod B was cut in Aker Solutions’ yard in Verdal, just hours after the Norwegian Parliament adopted temporary changes in the petroleum tax in June of last year. The tax changes were introduced to stimulate increased investments, and thus secure Norwegian jobs in an extremely demanding period for the oil and gas industry.

More than a hundred suppliers across Norway have contributed to the Hod development. At peak, around 550 people from Aker Solutions, the alliance and subcontractors have been working on the Hod B project at the yard in Verdal. More than 50 apprentices have completed large parts of their vocational training on the project.

“Through projects like Hod, we are creating value both for the company, partners, alliance partners, owners and the Norwegian society at large. We are also helping to sustain a world-leading supplier industry. I am especially proud of the fact that, through the Hod project, Aker BP has contributed to the vocational training of 50 apprentices. These apprentices, and the industry in general, have expertise that will be essential in the years to come. Several of the apprentices are already headed for renewable projects in Aker Solutions, such as the delivery of suction anchors and seabed installations for Hywind Tampen. This is the green energy transition in practice,” Hersvik says.

Improvements through alliances

The first normally unmanned platform delivered by the fixed platform alliance was Valhall Flank West. Hod B is a copy. 

“Through Hod B the alliance is delivering a product with very high quality, and we are incredibly proud of what they have achieved. We have learned important lessons in the Valhall Flank West project, have improved, and now see that we are able to work even faster and more efficiently with our alliance partners on Hod B. This shows that the alliance model works, and that is also why this model is an important part of Aker BP’s strategy,” says project manager Rannveig Storebø.

A total of five alliances are contributing to the Hod project. These alliances are integrated from start to finish in the project and by doing this, Aker BP has taken the alliance model to a new level. 

Important for the future of Valhall

Hod B will be remotely operated from Valhall, and the field will have extremely low CO2 emissions thanks to power from shore. Aker BP and partner Pandion expects Hod to produce 40 million barrels of oil equivalent.

“We look forward to bringing Hod on stream in the first quarter of next year. Aker BP will continue to increase value creation from the giant Valhall through new projects and a major ongoing modernisation of the area. Hod is an important contribution towards achieving the Valhall ambition of a total of two billion produced barrels from the area,” says Valhall Asset Manager Ole Johan Molvig.

Several subsea campaigns will be conducted in the Hod project leading up to production start in 2022, such as installation and connection of the gas lift pipelines, production flowlines and umbilicals. Modification work is under way at the Valhall field centre, and the Maersk Invincible drilling rig will be arriving this autumn to drill production wells.

The Hod B jacket is now safely installed and ready to receive the topsides later this summer. The installation was accomplished just one year after the first steel was cut in the project.

The Hod field will be developed with a normally unmanned installation which will be remotely operated from Valhall. CO2 emissions from the field will be very low as a result of power from shore.

The first steel for the platform was cut by Aker BP CEO Karl Johnny Hersvik at the Aker Solutions yard in Verdal on 9 June 2020. This occurred mere hours after the Parliament adopted temporary changes in the petroleum tax regime.

«I remember the day as an enormous relief. The preceding months were marred by disappointments and bad news. Oil prices were low, uncertainty was high, and we’d spent the last few months cutting costs and investments. Along with our alliance partners, we were able respond quickly and get the Hod project back on track. It’s absolutely fantastic that the jacket is in place on the field now, just one year later. Congratulations to everyone involved!» says Karl Johnny Hersvik.

Securing jobs

The fixed facilities alliance between Aker BP, Aker Solutions and ABB is delivering the Hod B platform. Both the jacket and topsides are being built at Aker Solutions in Verdal, and the work has secured a number of jobs at the yard.

«The temporary tax changes were introduced last year to stimulate increased investments and thereby secure Norwegian jobs in very challenging times for the oil and gas industry. Hod demonstrates that we can deliver on the task set out by the politicians. We can achieve this thanks to the close cooperation we’ve built over time with our alliance partners ,» Hersvik says.

Faster and more efficient
The first normally unmanned platform delivered by the platform alliance was Valhall Flank West. This was a fantastic delivery. Hod B is a copy.

«We now see that we work even faster and even more efficiently together on Hod compared to the Valhall Flank West project. This shows that the alliance model works. It’s also why this model is an important part of Aker BP’s strategy and the key to delivering profitable projects in a challenging market moving forward,» says SVP Projects Knut Sandvik in Aker BP.

Overall, Aker BP is planning to invest about 135 billion kroner in field development projects on the Norwegian shelf leading up to 2028. This will add more than 500 million barrels to Aker BP’s resource base, and more importantly – it will bring robust activity and a considerable number of jobs for several suppliers across the country.

«We currently have Hod B and three other projects in the execution phase. Nine projects are in early phase and working toward submitting plans for development and operation by the end of 2022,» Sandvik says.
Watch video – jacket installation

Alliance project
The Hod field is operated by Aker BP, which owns 90 per cent. Pandion Energy is the partner with a 10 per cent ownership interest. A total of five alliances are contributing to the project. The alliances are integrated from start to finish in the project, which means that Aker BP has taken the alliance model to a new level.

«Despite the Covid-19 pandemic, the project delivers according to plan. It’s fantastic. We succeed through our cooperation with our alliance partners. The alliance model allows us to integrate deliveries in an entirely different way than we could in a traditional customer-supplier model, which is incredibly motivating,» says project manager Rannveig Storebø.

The Hod B platform is scheduled to sail from the Verdal yard in August. At the same time work is under way to plan remaining activities to complete the project. Multiple subsea campaigns will be conducted to install and connect the gas lift pipe, production flowline and umbilical. Integration work is under way on Valhall and the Maersk Invincible drilling rig will start drilling production wells this autumn.

Important for the Valhall giant
Hod B is expected to contribute 40 million barrels of oil equivalent and will be important for Valhall to reach the ambition of a total of two billion produced barrels from the area. Production is scheduled to start in the first quarter of 2022.

«Projects like Hod B allow us to create considerable values both for us, our partners, alliance partners, owners, as well as the Norwegian society. We’re also contributing to maintain a world-leading supplier industry. This is an industry with expertise that is fundamental in the energy transition,» Karl Johnny Hersvik concludes.

Aker BP produces oil and gas with low emissions. The company aims to achieve a 50% reduction in its own greenhouse gas emissions in the 2030s and down to zero in 2050. In addition, Aker BP cooperates to reduce emissions for its suppliers . An example of this is the logistics and maritime department’s work to reduce indirect emissions from vessels.

Technical and operational initiatives

An important technical improvement is battery-powered vessels. Aker BP will electrify all supply vessels on long-term contracts within 2022.

Hull washing is an operational initiative, for which Aker BP is now investigating the potential. Hull washing reduces the resistance in the water, and thus reduces both fuel consumption and greenhouse gas emissions. There is little documentation on the measure’s effect on supply vessels, and therefore Aker BP is now studying the benefits of this initiative.

Study for measuring effect

In the winter of 2021, the company planned to wash the hulls of four vessels, as well as to conduct a study to document the effect. First, emission measurements were performed from the vessels. Similar measurements were made after the hulls were washed. The data base was limited for some of the vessels, but one could still see a clear connection between how much growth, which had been removed from the hull, and the development in fuel consumption. Aker BP has also been in dialogue with Equinor, which has conducted similar studies and measurements previously. This data was also used as a basis for comparison in the study.

Sharing knowledge with the industry

Aker BP has taken initiative and gathered seven other operating companies to share experiences, documentation, and findings from the study. The initiative was met with commitment and gratitude. By sharing knowledge and experiences, the company will contribute to a more sustainable oil and gas industry in Norway.

Operator Aker BP and the partners in Skarv (Equinor, Wintershall Dea and PGNiG) report that production has started from Gråsel in the Skarv area, four months ahead of the original schedule.

“I’m incredibly proud of the project team and our licence partners: Only six months have passed since the joint venture approved the investment decision to develop Gråsel. This must be one of the fastest project implementations ever on the Norwegian shelf,” says Aker BP CEO, Karl Johnny Hersvik.

“Together, we have once again completed a profitable project safely, efficiently and within budget – and on top of all that – much faster than planned when the project started,” Hersvik adds.

The Gråsel reservoir is situated over the Skarv reservoir in the Norwegian Sea, about 210 km west of Sandnessjøen. The reservoir contains around 13 million barrels of oil equivalent. The oil and gas are produced by utilising available capacity on the Skarv production vessel (FPSO).

Total investment costs for the Gråsel project are around NOK 1.2 billion.

Break-even price of USD 15 per barrel

The development consists of a new producer drilled from an existing well slot on the Skarv field, with pressure support from a shared injector for Gråsel and Tilje. 

“The stimulus package adopted by the Storting (Norwegian Parliament) last June, which entails more rapid tax depreciations, contributed to make the project even more robust and has accelerated the timeline,” Dolve adds.

Aker BP’s objective is to produce oil and gas in the most cost-effective way possible so as to maximise value creation for our owners, partners and the greater society – with the lowest possible impact on the climate.

“The Gråsel project is a superb example of this. The successful early-phase work and the safe and efficient project implementation in cooperation with our alliances is a model for future developments of minor discoveries,” says Dolve.

Seamless cooperation

The record-fast implementation can be credited to good fortune with early access to a drilling rig – and an agile project team using the opportunities that arose:

“In the planning phase, there was some uncertainty with regard to when we would have access to a drilling rig. When the pieces started to fall into place, the Deepsea Stavanger rig was ready and waiting for us as early as April. Then all we had to do was get to work,” says Nygård.

“The drilling campaign was carried out safely and efficiently, which helped to put us well ahead of the plan. It was also the first time in Aker BP history that a well intervention vessel was used to temporarily plug the injection well. This led to substantial cost reductions by reducing rig time,” says Nygård.

Production from Skarv has been shut down for 25 days in May and June due to a major planned turnaround (TAR). After planned maintenance and modifications were completed, production was first resumed from the Skarv and Ærfugl Phase 1 fields – before Gråsel was put on stream.

Nygård emphasises that the project has still not crossed the finish line.

“We still have the final stretch with the injection well, which is necessary to maintain pressure in the Gråsel reservoir. Among other things, this work will require rig time on the field, and the plan is to do this during the third quarter.”

Increased production and extended lifetime

“Production start-up from Gråsel is a new and important milestone in this growth strategy. Over the course of the year, the goal is to also bring Phase 2 of the Ærfugl development on stream,” says Bjørn.

“Start-up for Ærfugl and Gråsel will take Skarv back to a plateau production of over 170,000 bbls per day. In addition, the production increase will contribute to a reduction in CO₂ emissions per produced barrel from Skarv FPSO of as much as 30 per cent from 2022, and the Skarv lifetime will be extended by five years,” according to Bjørn.

A key part of the recently completed turnaround on the Skarv vessel was an upgrade of production capacity in the gas facility. This also means a further increase in capacity to accept production from other discoveries in the area.

“We’re maturing several development projects with the objective of making investment decisions by the end of 2022. The ambition is to phase in production from these developments over the next four-to-five years. As of today, the Shrek, Idun Nord, Alve Nord and Ørn discoveries are included in our ‘Skarv Satellite project’,” says Bjørn.

“We also have significant exploration ambitions in the Skarv area, and we’re working on a major exploration campaign including both operated and non-operated wells in 2022, Bjørn adds.